D-Sub Kits
Kit for D-Sub connectors
With the help of our D-Sub kits, you are guaranteed to achieve consistent high quality and spacing inside the housing, even with thin coaxial cables. They provide you with everything you need to make your own D-Sub adapter or cable whip.
Such an adapter can consist of 2 to 10 individual coaxial cables, the limit depending on the cross-section of the wires. Ten large diameter cables will not fit through the grommet of the D-Sub housing, so the use of a thinner cable is recommended here.
The optimized layout PCBs are just thick enough to fit between the contacts, saving you the hassle of soldering the individual cables to the D-Sub connector.
Available kits and connectors: DSub 9, DSub 15, DSub 25, DSub 37.
Definitions:
9-pin female (female) = BU female,
9-pin male (male) = ST pin male
Tip for the right cable:
When a PCB is used in conjunction with a coaxial cable, the coaxial cable must have a temperature resistant dielectric. Usually cables with a FEP jacket such as RG316, RG178 or Multiflex 86 are recommended.
Coaxial cables with D-Sub connector easily created!
With us you can have your kit with D-Sub on coaxial cable with matching plug or socket according to your ideas from one piece also manufactured by us. Example pictures, how something like this can look like, can be found at the end of the page.
Usually the signal distribution at the D-Sub plug or socket is realized by a corresponding printed circuit board. This guarantees a constant quality and optimizes the connection distances.
This connector type is available on request.
Here you will find an overview of all complete sets available in the store.
Pin assignment 9pol. D-Sub female and 9pol. D-Sub male
The following table gives an overview of the pin assignment and the allocation of the possible connections.
The corresponding PCB is equipped with as many connections as possible, so that omitting connections is not a problem.
The PCB solution is optimized for maximum distances between the individual contacts and guarantees consistent quality. The assignment is facilitated by the labeling of the printed circuit board.
Our kit is equipped with high-quality connectors and housings. Always included is a matching heat shrink tubing with inner adhesive to protect the cables to the outside.
Connector pattern 9-pin
View from the front (top view)
Sub-D BU 9pol. Socket / Plug ST Pin assignment D-Sub
Enclosed you find already realized printed circuit boards with the following pinout
| Assignment | Sub-D 9 pole | Sub-D 9 pole | Sub-D 9 pole |
|---|---|---|---|
| Article number | 135059 | 135050 | auf Anfrage |
| (LP123075) | (LP122419) | (LP123075) | |
| Type | female (A) | male (B) | male (B) |
| IN / shield | IN / shield | IN / shield | |
| CH 1 | 1 / 6 | 1 / 6 | 5 / 9 |
| CH 2 | 2 / 7 | 2 / 7 | 4 / 8 |
| CH 3 | 3 / 8 | 3 / 8 | 3 / 7 |
| CH 4 | 4 / 9 | 4 / 9 | 2 / 6 |
| n.c. | 5 | 5 | 1 |
Pin assignment 15pin D-Sub female and 15pin D-Sub male
The following table gives you an overview of the pin assignment and the assignment of the possible connections.
The matching PCB is equipped with as many connections as possible, so that omitting connections is not a problem.
The PCB solution is optimized for maximum spacing between the individual contacts and guarantees consistent quality. The labeling of the printed circuit board facilitates the assignment.
Our kit is equipped with high-quality connectors and housings. Always included is a matching heat shrink tubing with inner adhesive for the cable outlet in the housing.
Connector pattern 15-pin
View from the front (top view)
15pin female / male Pin assignment D-Sub
Enclosed you find already realized printed circuit boards with the following pinout
| Assignment | Sub-D 15 pole | Sub-D 15 pole |
|---|---|---|
| Article number | 135058 | 135051 |
| (LP122427) | (LP122420) | |
| Type | female (A) | male (B) |
| IN / shield | IN / shield | |
| CH1 | 1 / 9 | 1 / 9 |
| CH2 | 2 / 10 | 2 / 10 |
| CH3 | 3 / 11 | 3 / 11 |
| CH4 | 4 / 12 | 4 / 12 |
| CH5 | 5 / 13 | 5 / 13 |
| CH6 | 6 / 14 | 6 / 14 |
| CH7 | 7 / 15 | 7 / 15 |
| n.c | 8 | 8 |
Pin assignment 25pin D-Sub female and 25pin D-Sub male
The following table gives you an overview of the pinout of the 25pin DSub male and female connectors with the assignment of the possible connections.
Our kit is equipped with high quality connectors and housings. Always included is a matching heat shrink tubing with inner adhesive for the cable exit in the housing.
Connector pattern 25-pin
View from the front (top view)
Pin assignment D-Sub
Enclosed you find already realized printed circuit boards with the following pinout
| Assignment | Sub-D 25 pole | Sub-D 25 pole | Sub-D 25 pole | Sub-D 25 pole |
|---|---|---|---|---|
| Article number | 135057 | 135052 | ||
| (LP122428) | (LP122346) | (LP122398) | (LP122403) | |
| Suitable for D-Sub Box | ||||
| Type | female (A) | male (B) | male (B) | female (A) |
| IN / shield | IN / shield | IN / shield | IN / shield | |
| CH1 | 1 / 14 | 1 / 14 | 24 / 25+12 | 13 / 25 |
| CH2 | 2 / 15 | 2 / 15 | 10 / 23+11 | 12 / 24 |
| CH3 | 3 / 16 | 3 / 16 | 21 / 22+9 | 11 / 23 |
| CH4 | 4 / 17 | 4 / 17 | 7 / 20+8 | 10 / 22 |
| CH5 | 5 / 18 | 5 / 18 | 18 / 19+6 | 9 / 21 |
| CH6 | 6 / 19 | 6 / 19 | 4 / 17+5 | 8 / 20 |
| CH7 | 7 / 20 | 7 / 20 | 15 / 16+3 | 7 / 19 |
| CH8 | 8 / 21 | 8 / 21 | 1 / 14+2 | 6 / 18 |
| CH9 | 9 / 22 | 9 / 22 | 5 / 17 | |
| CH10 | 10 / 23 | 10 / 23 | ||
| CH11 | 11 / 24 | 11 / 24 | ||
| CH12 | 12 / 25 | 12 / 25 | ||
| n.c. | 13 | 13 |
Pin assignment 37pol. Sub-D female and 37pol. Sub-D plug
The following table gives you an overview of the pinout of the 37 pin D-Sub male and female connectors with the assignment of the possible connections.
Our kit is equipped with high quality connectors and housings. Always included is a matching heat shrink tubing with inner adhesive for the cable exit in the housing.
Connector pattern 37-pin
View from the front (top view)
Pin assignment D-Sub
Enclosed you find already realized printed circuit boards with the following pinout
| Assignment | Sub-D 37 pole | Sub-D 37 pole |
|---|---|---|
| Article number | 135053 | 135056 |
| Type | male (B) | female (A) |
| IN / shield | IN / shield | |
| CH1 | 1 / 20 | 1 / 20 |
| CH2 | 2 / 21 | 2 / 21 |
| CH3 | 3 / 22 | 3 / 22 |
| CH4 | 4 / 23 | 4 / 23 |
| CH5 | 5 / 24 | 5 / 24 |
| CH6 | 6 / 25 | 6 / 25 |
| CH7 | 7 / 26 | 7 / 26 |
| CH8 | 8 / 27 | 8 / 27 |
| CH9 | 9 / 28 | 9 / 28 |
| CH10 | 10 / 29 | 10 / 29 |
| CH11 | 11 / 30 | 11 / 30 |
| CH12 | 12 / 31 | 12 / 31 |
| CH13 | 13 / 32 | 13 / 32 |
| CH14 | 14 / 33 | 14 / 33 |
| CH15 | 15 / 34 | 15 / 34 |
| CH16 | 16 / 35 | 16 / 35 |
| CH17 | 17 / 36 | 17 / 36 |
| CH18 | 18 / 37 | 18 / 37 |
| n.c. | 19 | 19 |
Example of the structure of a D-Sub connector for coaxial cable
