
Connector in the configurator, connector assembled
Below you will find a list of all connectors available in our cable configurator. Select the connector and corresponding cable type. The link leads you to the appropriate selection in the configurator with the desired assembly on both ends. Of course you can also get combinations beyond these listed connectors on request.




SMA
SMA connectors are mainly used for applications in the frequency range from 1 GHz to 18 GHz. A SMA plug has a union nut and an external thread (wrench size 8) with pin as inner conductor.
With the following links you receive the desired SMA plugs and SMA sockets pre-selected in the configurator as cable assembly.

SMB
The SMB connectors are used for frequencies up to 4GHz and, in contrast to SMA and SMC plugs, are only plugged in and not screwed together. They are mainly used for device-internal connections. The links below will give you the desired SMB plugs and SMB sockets preselected in our configurator as a cable assembly.

SMC
The SMC connector externally resembles the SMA connector, but the wrench size of the threadlocker is smaller (wrench size 6,35 instead of 8). The electrical data and dimensions are the same as those of the SMB connector. The following links provide you with the desired cable assemblies with SMC plugs and SMC sockets preselected in the configurator.
SMC jack | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, LN 5001 LowNoise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 188 AU, RG 196 AU, M17113RG316C, M17113RG316, RGD 316, RGL 196 LowNoise, Sucoform86, Sucoform86FEP, Sucoform86LSFH |
SMC angle jack | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, LN 5002 Low Noise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M17113RG316C, M17113RG316, RGD 316 |
SMC plug | M17113RG316C, M17113RG316 |
SMC bulkhead jack | LMR100A, LMR100AFR, M17119RG174, M17119RG174, RG 188 AU, M17113RG316C, M17113RG316 |


SSMB plug | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, LN 5001 LowNoise, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 196 AU, M17113RG316, RGD 316, RGL 196 LowNoise |
SSMB jack | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, LN 5001 LowNoise, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 196 AU, M17113RG316C, M17113RG316, RGD 316, RGL 196 LowNoise |
SSMB angle jack | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, LN 5001 LowNoise, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 196 AU, RGD 316, RGL 196 LowNoise |

SSMC plug | Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, M17113RG316, RGL 316 LowNoise, SS 405 |
SSMC jack | Multiflex 86, M17119RG174, M17119RG174, RG 188 AU, M17113RG316C, M17113RG316, RGL 196 LowNoise, RGL 316 LowNoise, SS 405 |
SSMC angle jack | MXR 0,45L1,4, Multiflex 86, RG 188 AU, M17113RG316C, M17113RG316, RGL 316 LowNoise, SS 405 |

MCX jack | MXR 0,45L1,4, CLF 100, Enviroflex 316D, K02252D, LMR100A, LMR100AFR, LN 5001 LowNoise, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 196 AU, M17113RG316C, M17113RG316, RGD 316, RGL 196 LowNoise |
MCX plug | MXR 0,45L1,4, CLF 100, Enviroflex 316D, K02252D, LMR100A, LMR100AFR, LN 5001 LowNoise, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 196 AU, M17113RG316C, M17113RG316, RGD 316, RGL 196 LowNoise, Sucoform141, Sucoform141FEP |
MCX angle plug | MXR 0,45L1,4, CLF 100, Enviroflex 316D, K02252D, LMR100A, LMR100AFR, LN 5001 LowNoise, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 188 AU, RG 196 AU, M17113RG316C, M17113RG316, RG 316 U, RGD 316, RGL 196 LowNoise |
MCX bulkhead jack | Multiflex 86, RG 188 AU, M17113RG316C, M17113RG316, Sucoform86, Sucoform86FEP, Sucoform86LSFH |
MMBX bulkhead jack | Sucoform86, Sucoform86FEP, Sucoform86LSFH |

MMCX jack | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 196 AU, M17113RG316, RGD 316, RGL 196 LowNoise |
MMCX plug | MXR 0,45L1,4, CLF 100, Enviroflex 316D, LMR100A, LMR100AFR, LN 5001 LowNoise, LN 5002 Low Noise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 188 AU, RG 196 AU, M17113RG316C, M17113RG316, RG 316 U, RGD 316, RGL 196 LowNoise, RGL 316 LowNoise, SS 405 |
MMCX angle plug | MXR 0,45L1,4, CLF 100, Enviroflex 316D, K02252D, LMR100A, LMR100AFR, LN 5001 LowNoise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 188 AU, RG 196 AU, M17113RG316C, M17113RG316, RG 316 U, RGD 316, RGL 196 LowNoise, RGL 316 LowNoise |
MMBX plug | M17113RG316C |

UHF
The UHF connector is essentially a shielded 4mm banana plug. Unlike other high-frequency connectors, UHF connectors have no defined characteristic impedance. Depending on the model, manufacturer and frequency, the charateristic impendance is 30Ω or 50Ω. For this reason, no standing wave ratio can be specified for UHF connectors, which precludes use with high quality equipment.

Mini UHF
The Mini-UHF is a scaled-down version of the UHF connectors with improved electrical properties. It has a screw cap and can be used up to a frequency of 2.5 GHz. In contrast to the UHF series, the connectors of the Mini-UHF series have a defined characteristic impedance of 50 Ohm. The connectors of the Mini-UHF series are often used in mobile radio and in vehicles.
Mini UHF plug | 7806A, arnoflex 58 LSNH, CLF 195, HF 195 LSNH, LMR195, LMR195 UF, RG 058 CU, RG 58 ALL, M1728RG58, M1728RG58, RG 58 CX LSNH, M1728RG58PUR, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, M17113RG316 |
Mini UHF bulkhead jack | M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, M17113RG316 |
Mini UHF jack | 7806A, arnoflex 58 LSNH, LMR195, RG 058 CU, M1728RG58, M1728RG58, RG 58 CX LSNH |
Mini UHF angle plug | 7806A, CLF 195, LMR195, LMR195 UF, M1728RG58, M1728RG58 |
TS9 plug | M17119RG174, M17119RG174, RG 188 AU, M17113RG316C, M17113RG316 |
TS9 angle plug | M17119RG174, M17119RG174, RG 188 AU, M17113RG316C, M17113RG316 |
WiClic plug | Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M17113RG316C, M17113RG316, RGD 316 |
WiClic jack | Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M17113RG316C, M17113RG316, RGD 316 |

UNF 10-32 plug | CLF 100, LMR100A, LMR100AFR, LN 5001 LowNoise, LN 5002 Low Noise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 188 AU, RG 196 AU, M17113RG316C, M17113RG316, RGL 196 LowNoise, RGL 316 LowNoise, SS 405 |
UNF 10-32 angle plug | LN 5002 Low Noise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, M17113RG316, RGL 316 LowNoise |
UNF 10-32 jack | LN 5002 Low Noise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, M17113RG316, RGL 316 LowNoise |

FAKRA
FAKRA connectors (DIN 725941) are mainly used in vehicles. They are used in GSM mobile communications, GPS antennas as well as in navigation and car radio antennas.
There are up to 13 different mechanical and color markings for the FAKRA connectors.
More information about suitable codings at Fakra Coding
Fakra plug | arnoflex 58 LSNH, CLF 100, Enviroflex 316D, ENVIROFLEX400, HF 195 LSNH, LMR100A, LMR100AFR, LMR195, LMR195 UF, RG 058 CU, M1728RG58, M1728RG58, RG 58 CX LSNH, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, M17113RG316, RG 316 U, M17128RG400C, RGD 316 |
Fakra jack | arnoflex 58 LSNH, CLF 100, Enviroflex 316D, ENVIROFLEX400, HF 195 LSNH, LMR100A, LMR100AFR, LMR195, LMR195 UF, RG 058 CU, M1728RG58, M1728RG58, RG 58 CX LSNH, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, M17113RG316, RG 316 U, M17128RG400C, RGD 316 |
Fakra angle jack | RG 058 CU, RG 58 ALL, M1728RG58, M1728RG58, RG 58 CX LSNH, M1728RG58PUR |

1.0/2.3
Coaxial cables with DIN 1.0/2.3
Connectors are suitable for the transmission of very high bit rates in video transmission. The series 1.0/2.3 according to DIN 47297, are plug compatible and have a very good electrical and mechanical stability. With us you get BNC cable Din 1.0/2.3 on BNC socket for up to 6G-SDI transmission. The Mini Coax DIN 1.0 / 2.3 available as male and female.
The RF connector of the DIN 1.0 / 2.3 series is often used as an alternative to BNC in the 75 Ohm version due to its small size.

4.3-10
4.3-10 connector is a robust and reliable connector for mobile communication technology. It is suitable for outdoor applications in industry, communications and radar technology as well as in mobile communications. This connector was developed in collaboration with several manufacturers and is now the standard in telecommunications. It is available as a push-pull variant for tool-free assembly.
4.3-10 plug | LMR400 UF |

7-16 DIN plug | 7806A, arnoflex 58 LSNH, CLF 195, Ecoflex10 plus, Ecoflex10, Ecoflex15, Ecoflex15plus, ENVIROFLEX142, ENVIROFLEX400, H155 PE WC55, H155 LSNH, H155 PE, H155 PVC, HF 195 LSNH, HF 240 LSNH, HF 400 LSNH, LMR195, LMR195 UF, LMR240, LMR240FR, LMR240 UF, LMR400, LMR400DB, LMR400 UF, LMR600, LMR600FR, RG 058 CU, RG 58 ALL, M1728RG58, M1728RG58, RG 58 CX LSNH, M1728RG58PUR, M1760RG142, M1774RG213U, M1775RG214, M1775RG214, M1775RG214, M1784RG223, M1784RG223, M1784RG223U, M17128RG400C |
7-16 DIN jack | Ecoflex15, Ecoflex15plus, LMR600, LMR600FR |
7-16 DIN angle plug | Aircom Premium, HF 400 LSNH, LMR400, LMR400DB, LMR400 UF, LMR600, LMR600FR |

D-Sub male contact | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, LN 5001 LowNoise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 188 AU, RG 196 AU, M17113RG316C, M17113RG316, RG 316 U, RGL 196 LowNoise |
D-Sub female contact | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, LN 5001 LowNoise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 188 AU, RG 196 AU, M17113RG316C, RG 316 U, M17113RG316, RGL 196 LowNoise |

Lemo 00 plug | Airborne 5, Aircell 5, MXR 0,45L1,4, CLF 100, CLF 200, Enviroflex 316D, ENVIROFLEX400, K02252D, LMR100A, LMR100AFR, LMR200, LN 5001 LowNoise, Multiflex 86, PEP141, RG 058 CU, M1728RG58, M1728RG58, RG 58 CX LSNH, M17119RG174, M17119RG174, M17119RG174 LSNH, M1793RG178, RG 178, RG 188 AU, RG 196 AU, M1784RG223, M1784RG223, M1784RG223U, M17113RG316C, RG 316 U, M17113RG316, RGD 316, RGL 196 LowNoise, SS 402, SS 405 |
Lemo 00 jack | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M17113RG316C, M17113RG316, RGD 316 |
Lemo 00 angle plug | CLF 100, LMR100A, LN 5002 Low Noise, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, RG 316 U, M17113RG316, RGL 316 LowNoise, SS 405 |

Lemo 0S plug | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M17113RG316C, M17113RG316, RGD 316 |
Lemo 0S bulkhead jack | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU |

Lemo 1S plug | 7806A, arnoflex 58 LSNH, MXR 0,45L1,4, CLF 100, CLF 195, ENVIROFLEX142, ENVIROFLEX400, LMR100A, LMR100AFR, LMR195, LMR195 UF, Multiflex 86, RG 058 CU, M1728RG58, M1728RG58, RG 58 CX LSNH, M1728RG58PUR, M1760RG142, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, M17113RG316, RGD 316 |
Lemo 1S jack | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, M17113RG316C, M17113RG316, RGD 316 |

QLS plug | Enviroflex 316D, K02252D, LMR100A, LMR100AFR, RGD 316 |
QLS angle plug | K02252D, RGD 316 |
QMA angle plug | MXR 0,45L1,4, CLF 100, LMR100A, LMR100AFR, Multiflex 86, M17119RG174, M17119RG174, M17119RG174 LSNH, RG 188 AU, M17113RG316C, RG 316 U, M17113RG316 |

Direct cable connections
Direct cable connectors for coaxial cables enable direct soldering of coaxial cables into PCBs. Straight and angled versions with 1, 2 or 4 solder connections are available as standard. More information

Stripped / Tin-plated
As an ideal preparation for the later processing of a cable, we strip the cable end to suit your application. Unless otherwise requested by you, we cut the shield and sheath to fit and do not pull them off the cables. This means that the cable is also protected during transport and can simply be pulled off shortly before further processing. Of course, we can also supply you with any other size of stripping you require.
We tin the end of the cable with RoHS-compliant tin to suit your application. Tinning is a good preparation for the later soldering of a cable in connection with an electronic circuit (PCB).
In the following selection, we naturally only offer you the cables that are suitable for this.

Test lead with mini test termina
The advantage of the mini test terminal for measurement work when using coaxial cables is the signal shielding and the reduction of errors when measuring signals with low voltage.
Combined with a BNC connector, this test lead can be connected to almost all common measuring instruments.
More about BNC test lead with test probe can be found here: link

Banana plugs 2mm/4mm
We recommend cables with banana plugs of 2mm or 4mm for the transmission of low-level direct currents, low-frequency alternating currents or in the laboratory. The coaxial structure of the cable provides protections against electrical interference and fields with the outer conductor. This reduces errors in the measurement of low voltage signals.


0,64mm jack | M17119RG174, M17119RG174, M17119RG174 LSNH, M17113RG316C, M17113RG316 |