In this section you will find everything about connector equipment and links to further information.
Inquiry form for your customized cable for download: Inquiry form
Cable bend relief sleeves are used for the mechanical protection of cables against excessive bending directly at the connector. They can also be used to mark different signals via the cable grommet. For subminiature connectors (e.g. series MMCX, SSMB, SSMC) we recommend the use of heat shrinkable sleeves, since in this case the cable bend relief would be too large and the connectors would disappear in the sleeves.
Temperature range: up to +80°C possible.
Available in 10 colors:
black (standard), brown, red, orange, yellow, green, blue, violet, grey, white
Please note: Unless otherwise requested by you, we always deliver with black bend protection.
Do you not want an anti-kink grommet? Select "no bend protection" in the configurator accordingly.
Alternatively, you can also get a shrink sleeve with / without inner adhesive as kink protection. You can find more under cable protection here
A heat shrink tubing is a good alternative to the bend protection sleeve. It is used wherever a grommet would be too large or expensive due to the installation situation or for cost reasons. The heat shrink tubes used by us are flame resistant, made of flexible polyolefin tubing and go up to max. +125°C. They extend approx. 5 mm over the plug crimp sleeve and are available in five colors: black (standard), red blue, yellow, green/yellow.
For outdoor applications, we recommend heat-shrinkable tubing with internal adhesive. These are usually thicker and seal the cable against moisture penetration.
Alternatively, we also offer Teflon heat-shrinkable tubing, which is available in transparent and can be used at temperatures up to 260 °C.
As accessories for Fakra plugs and sockets, you can obtain codings that prevent the cable from being plugged in incorrectly.
The coding system of the standard plastic housings offers up to 13 mechanical and color codings. This makes it easy to quickly find the right cable from a cable bundle.
We use only Rosenberger materials for the connectors and the codings and process all contacts according to the manufacturer's specifications.
In order to achieve an optimal differentiation of the cables, we offer you an individual labeling on two lines with up to 15 characters per line. The labels produced by us are waterproof, abrasion and acid resistant and therefore offer a durable possibility e.g: serial numbers, company name, connection location, etc. directly on the cable.
Tip: Use in combination with our colored bend protection. The design: Our wraparound labels are available in widths of 12.70 mm and 25.40 mm. The printing is black on a white background. A 2-line print with a maximum of 15 characters each is possible. The standard width of the labels is 25.40 mm and the distance from the end of the plug is 50 mm. Do you wish a different distance or 12.70 mm wide label? Simply specify when ordering.
To the configurator
Protective caps and cover caps protect your connectors from external influences such as dust as long as they are not connected to your application. For convenient handling, our cover caps are also optionally available with chains so that they do not get lost when not in use. Every cover cap in our range is waterproof to IP67 or IP54.
Protect your cable assemblies with protective caps now!
When the connectors are not in use, the cover cap provides reliable protection against dust and dirt. This guarantees that the contacts remain clean and deliver good results for a long time.